Berkeley Varitronics Systems Call 1-800-737-4BVS
Champ Champ
Champ Champ

***BVS is no longer shipping the Champ signal strength meter but continues to support current Champ customers. BVS recommends Fox in place of Champ.***

Price Quote

Features

Specifications

Frequencies

Software

FAQs

Champ Signal Strength Meter

This compact (less than 5 lbs.) hand-held, battery-powered meter is packed with exceptional capabilities. The Champ™ is convenient for finding RF "shadows" in indoor wireless systems for drive-around studies to detect RF leakage and propagation coverage. The PCMCIA memory system stores data for post processing.

Download Champ data sheet

Download Champ manual from the Technical Support section

Download Champ software updates

 

 

Champ Features

back to top

 

Champ Specifications

Display  64x240 Graphic Backlit Electro-Luminescent LCD (Super Twist) 
Tuning Range  20-40 MHz tuning range of band 
Sensitivity  -118 to -30 dB + 1 dB (@ 10 KHz IF Bandwidth) 
Adj. Chan. Rejection  > 50 dB @ 30 KHz 
 
RSSI MEASUREMENTS

msec/chan

chart/sec
RSSI Measurement

15

50
Fast Scan (Scan RX Band)

15

66

GENERAL SPECIFICATION

Dual Conversion  83 MHz first IF, 455 KHz second IF 
IF Bandwidth  4 KHz, 10 KHz, 25 KHz or 30 KHz available (@ 5dB) 
Stability  +2.5 PPm from freezing to 120 degrees F 
Phase Noise  > 80 DBC @ 1 KHz 
Antenna  TNC 50 ohms 
Controls  20 button keypad 
Warm -Up Time  < 3 minutes  
Power 
Internal 12 Volt Ni-Cad batteries 1.8 A.H.
Internal battery run time > 8 hours
External car cigarette lighter 12-16 VDC @ 200 mA
DC transformer 16V @ 500 mA, 120 or 240 VAC auto switching

MECHANICAL

Serial Port  RS-232, 9600 baud, 8 bit. no parity, 1 stop bit  
Weight  5 lbs. 
Dimensions  3.5" H x 6" W x 7.75" L 
Approvals  UL, CSA 
 

INCLUDES

Antenna  Right angle TNC 50 ohm 
Case  Black vinyl foam lined carrying case with shoulder strap 
Car Lighter Adapter  12-16 VDC @ 200 mA 
Charger  Battery charger with fast charge circuit (< 2 hours full charge) 
PC Software  3-1/2" Diskette MS DOS - source code included 
GPS  8-channel differential capable GPS with active antenna 
ChameleonCW  file conversion software for Windows 95/98 
 

OPTIONS

PCMCIA  Mass (Non-Volatile) Storage RAM Cards (2 MBytes to 8 MBytes)  
IF Bandwidth  4 KHz, 10 KHz, 25 KHz, 30 KHz 
BER Demodulation  Bit byte packet and burst error counts (certain models only) 
Printer  Seiko, Inc. DPU-411 or DPU-411 Type 11, with cable
GPS  Dead Reckoning available  

back to top

 

Champ Frequencies

 

Champ Software
Champ Download Utility Champ Download Utility

Data from the Champ measurements are saved to a 2 Mbyte PCMCIA battery backed-up card and to an RS-232 serial port for direct storage to a PC (up to 38K baud, selectable). The PCMCIA card data can be down-loaded to a PC using the supplied PC software. Serial output may be binary (compressed) for later conversion or in an ASCII comma delimited format. The Champ data can be imported directly into third-party software including spread sheets, such as EXCEL or propagation analysis software such as TEC's Wizard. Visit our Technical Support section for updated downloads of this software, demos and more.

back to top

 

Champ FAQs
Can I export Champ data into my favorite mapping program?
Yes. Champ supports a variety of post-processing software.
 
 
How do I get the data into my PC?
Use the Champ Data Logger and then upload that data through the serial port of your PC in either binary or ASCII delimited format or through the PCMCIA storage card included with your Champ.

back to top


       
       
       
       
       

® 2007 Berkeley Varitronics Systems