| DEMODULATOR SPECIFICATIONS: |
|
| Bands Supported |
2.0-4.0 GHz and 4.9-5.9 GHz (includes 802.11a) |
| RF Sensitivity (Wide Band) |
-20 to -90 dBm |
| Packet Preamble Demodulator and Analyzer |
Multipath Measurement and Graphical Display |
| Correlated Power Measurements |
Ratio |
| Correlated Power (dBm) |
-30 dBm : -100 dBm |
| Correlated Power to Total Power Ec/Io (dB) |
0 dB : -10 dB |
| Total Channel Power Measurement |
-20 dBm : -80 dBm |
| SPECTRUM ANALYZER SPECIFICATIONS: |
|
| Bands Supported |
2.0-4.0 GHz and 4.9-5.9 GHz (includes 802.11a) |
| Average Noise Floor (no input) |
< -100 dBm (reference level -70 dBm, resolution bandwidth=50 kHz) |
| Dynamic Range |
> 40 dB |
| Level Accuracy |
+ 1.5 dB (25º C) |
| Max Input (safe) |
+ 0 dB |
| Max Input (no saturation) |
-20 dB |
| Reference Level |
-20 to -70 dBm (10 dB steps) |
| Display (iPAQ) |
see HX2700 specifications |
| Operating System |
Windows® Mobile 5.0 |
| TRIGGERING: |
|
| User Control |
Auto or Manual |
| Packet/Interefrence Trigger |
Trigger analyzer when input power meets or exceeds threshold (20 MHz span) |
| Trigger Threshold |
User settable in dBm |
| Trigger Delay |
User settable in ms |
| GENERAL SPECIFICATIONS: |
|
| Input Connector |
SMA Female 50 ohm |
| Power |
Li-PO, AC, DC |
| Runtime Internal Battery |
> 3 hours |
| Recharge Time |
< 3 hours |
| PHYSICAL SPECIFICATIONS: |
|
| Weight |
3 lbs. |
| Dimensions |
3" H x 5" W x 9 " L (water resistant, high-impact ABS plastic case) |
| INCLUDED ACCESSORIES: |
|
| 2.4 GHz Omni-Directional Antenna, 5 GHz Omni-Directional Antenna, AC/DC Power |
| OPTIONAL
ACCESSORIES: |
|
| 12V car adapter, 2.4 GHz Directional Finding Antenna, 5 GHz Directional Finding Antenna |
| OPTIONAL DIRECTION FINDING ANTENNA : |
|
| Frequency |
5150-5350 MHz |
| Gain |
5 dBi |
| VSWR |
<2 : 1 |
| Impedence |
50 Ohm nominal |
| Beamwidth |
75 degree vertical, 65 degree horizontal |
| Front-to-Back Ratio |
22 dB or better |
| Material |
Powder-coated aluminum, ABS plastic radome |
| Weight |
1 Lb. |
| Connector |
SMA attached at rear of antenna |
| Frequency |
2300-2600 MHz |
| Gain |
9 dBi |
| Bandwidth @ 2:1 SWR |
200 MHz or better |
| Impedence |
50 Ohm nominal |
| Beamwidth |
75 degree vertical, 65 degree horizontal |
| Front-to-Back Ratio |
22 dB or better |
| Material |
Powder-coated aluminum, ABS plastic radome |
| Weight |
1 Lb. |
| Connector |
SMA attached at rear of antenna |
