|
 |
Features |
- Full LTE Demodulation: Identity, Cell Identify Group, Cell Identity, FDD/TDD System, Normal/Extended CP, Number of BS, Transmit Antenna, PBCH Channel
- Full LTE Spectrum Analysis: RSSI, Quality/CINR, Multipath
- Full 700 MHz - 2.2 GHz or 2.0 - 5.9 GHz (choose between models)
- RF Direction Finding (using optional antenna)
- True Multipath Measurements
- RF Interference Detection
- Peak Search / Hold with up to 4 Peak Hold waveform traces
- User Selectable Power Triggers
- Waveform Snapshots of any screen
- Performs Site Survey Mapping Coverage (using optional DragNet software)
- Performs Remote Monitoring and Control via Ethernet Connection (using optional YellowFin Remote Manager software)
- Designed and manufactured in the USA
|
 |
 |
 |
| LTE Spectrum Data |
LTE Single Frequency |
LTE Multipath Scan |
 |
 |
 |
| LTE Basestation Scan |
LTE Field Selection |
LTE Spectrum Scan |
|
|
|
|
|
Technical Specifications |
DOWNLOAD FULL DATA SHEET |
| Bands Supported |
MODEL C
700 MHZ - 2.2 GHz
|
MODEL D
2.0 GHz - 5.9 GHz
|
| RF Sensitivity (Wide Band) |
-20 to -90 dBm |
| RSSI (Channel) |
-20 to -80 dBm |
| Correlated Multipath Measurements |
0 to -10 dB |
| CINR |
0 to +20 dBm |
| SPECTRUM ANALYZER SPECIFICATIONS: |
|
| Bands Supported |
MODEL C
700 MHZ - 2.0 GHz
|
MODEL D
2.0 GHz - 5.9 GHz
|
| Average Noise Floor (no input) |
< -100 dBm (reference level -70 dBm, resolution bandwidth=50 kHz) |
| Dynamic Range |
> 40 dB |
| Level Accuracy |
+ 1.5 dB (25º C) |
| Max Input (safe) |
+ 0 dBm |
| Max Input (no saturation) |
-20 dBm |
| Reference Level |
-20 to -70 dBm (10 dB steps) |
| TRIGGERING: |
|
| User Control |
Auto or Manual |
| Packet/Interefrence Trigger |
Trigger analyzer when input power meets or exceeds threshold (20 MHz span) |
| Trigger Threshold |
User settable in dBm |
| Trigger Delay |
User settable in mS |
| GENERAL SPECIFICATIONS: |
|
| Internal GPS Receiver |
12-channel/satellite GPS receiver |
| Input Connector |
SMA Female 50 ohm |
| Power |
Li-PO, AC, DC |
| Runtime Internal Battery |
> 3 hours |
| Recharge Time |
< 3 hours |
| PHYSICAL SPECIFICATIONS: |
|
| Weight |
5 lbs. |
| Dimensions |
1.5" H x 7.5" W x 5" L (water resistant, high-impact ABS plastic case) |
| OPTIONAL
ACCESSORIES: |
|
| 12V car adapter, 2.4 GHz Directional Finding Antenna, Directional Finding Antenna |
|
|
Frequently Asked Questions
|
|
- Does
the YellowFin-LTE do WiMAX studies?
-
- While the YellowFin does scan the spectrum that common 802.11 Wi-Fi and WiMAX devices operate on, it does not demodulate Wi-Fi or WiMAX packets. YellowFin was designed for 4G LTE installations, troubleshooting and interference detection.
|
|
|
.jpg){kind=small}
