|
Related Products
Features
Specifications
Frequencies
Software
FAQs |
BVS has put together the most comprehensive WiMAX analysis package available for either 802.16e Mobile WiMAX or 802.16d Fixed WiMAX networks. Tortoise is a portable, dual-band stimulus transmitter that can transmit modulated WiMAX perfect for simulating a WiMAX base station. The YellowFin analyzer series are calibrated, handheld receivers that assist engineers in everything from installation to network interference to multipath analysis. Finally, DragNet site survey software grabs realtime meaurements from any WiMAX deployment and overlays that coverage data onto GPS accurate maps and floorplans. And if that's still not enough, Berkeley has even released a YellowFin-OEM WiMAX receiver module with an SDK for clients that wish to create their own custom software packages to sell or use in their own WiMAX network studies.
Contact your local BVS sales representative for a complete quote by clicking HERE.
|
|
|
|
|
-
WiMAX 802.16e or 802.16d Packet Analysis
-
WiMAX Spectrum Analysis
-
Scans Up To 20 Samples Per Second
-
Measures All 114 Preambles
-
Optional WiMAX OFDMA modulator for base station simulation
-
Two independent transmitter module bays
-
RF Direction Finding (using optional antenna)
-
True Multipath Measurements
-
RF Interference Detection
-
Peak Search / Hold with up to 4 Peak Hold waveform traces
-
User Selectable Power Triggers
-
Waveform Snapshots of any screen
-
CE Certification
-
Performs Site Survey Mapping Coverage (using optional DragNet software)
-
|
|
|
| DEMODULATOR SPECIFICATIONS: |
|
| Bands Supported |
2.0 - 5.9 GHz (802.16e) |
| Channel Bandwidths |
3.5, 5, 7, 8.75, 10 MHz |
| RF Sensitivity (Wide Band) |
-20 to -90 dBm |
| ID Cell & Segment |
|
| RSSI (Channel) |
-20 to -80 dBm |
| Correlated Multipath Measurements |
0 to -10 dB |
| CINR |
0 to +20 dBm |
| SPECTRUM ANALYZER SPECIFICATIONS: |
|
| Bands Supported |
2.0 - 5.9 GHz |
| Average Noise Floor (no input) |
< -100 dBm (reference level -70 dBm, resolution bandwidth=50 kHz) |
| Dynamic Range |
> 40 dB |
| Level Accuracy |
+ 1.5 dB (25º C) |
| Max Input (safe) |
+ 0 dBm |
| Max Input (no saturation) |
-20 dBm |
| Reference Level |
-20 to -70 dBm (10 dB steps) |
| TRIGGERING: |
|
| User Control |
Auto or Manual |
| Packet/Interefrence Trigger |
Trigger analyzer when input power meets or exceeds threshold (20 MHz span) |
| Trigger Threshold |
User settable in dBm |
| Trigger Delay |
User settable in mS |
| GENERAL SPECIFICATIONS: |
|
| Internal GPS Receiver |
12-channel/satellite GPS receiver |
| Input Connector |
SMA Female 50 ohm |
| Power |
Li-PO, AC, DC |
| Runtime Internal Battery |
> 3 hours |
| Recharge Time |
< 3 hours |
| PHYSICAL SPECIFICATIONS: |
|
| Weight |
5 lbs. |
| Dimensions |
1.5" H x 7.5" W x 5" L (water resistant, high-impact ABS plastic case) |
| OPTIONAL
ACCESSORIES: |
|
| 12V car adapter, 2.4 GHz Directional Finding Antenna, 5 GHz Directional Finding Antenna |
| OPTIONAL DIRECTION FINDING ANTENNA: |
|
| Frequency |
5150-5350 MHz |
| Gain |
5 dBi |
| VSWR |
<2 : 1 |
| Impedence |
50 Ohm nominal |
| Beamwidth |
75 degree vertical, 65 degree horizontal |
| Front-to-Back Ratio |
22 dB or better |
| Material |
Powder-coated aluminum, ABS plastic radome |
| Weight |
1 Lb. |
| Connector |
SMA attached at rear of antenna |
| Frequency |
2300-2600 MHz |
| Gain |
9 dBi |
| Bandwidth @ 2:1 SWR |
200 MHz or better |
| Impedence |
50 Ohm nominal |
| Beamwidth |
75 degree vertical, 65 degree horizontal |
| Front-to-Back Ratio |
22 dB or better |
| Material |
Powder-coated aluminum, ABS plastic radome |
| Weight |
1 Lb. |
| Connector |
SMA attached at rear of antenna |
| TABLET SPECIFICATIONS: |
|
| Manufacturer |
Samsung (Q1 Ultra) |
| CPU |
Intel Pentium 1.33 GHz |
| LCD |
7" WVGA |
| Operating System |
Windows XP UMPC Tablet Edition |
| VRAM |
Shared |
| Memory |
1 GB DDR 400 |
| HDD |
80 GB (4200 RPM) |
| ODD |
None |
| Wired |
100 MB LAN |
| Built-In Wireless |
802.11g+BT |
| Weight |
2 lbs. |
| Dimensions |
1" H x 5" W x 9" L |
|
|
|
|
|
|
The YellowFin Data Logger is a software
application for that displays, records and logs all spectrum and preamble WiMAX network data received by the YellowFin receiver. The software allows complete
control of the YellowFin receiver data can be saved
on the tablet for later replay and conversion.
|
WiMAX Preamble Indices - Multiple Frequency Carriers
|
|
WiMAX Spectrum Analysis - Channel Power
|
|
WiMAX Preamble Analysis - Preamble RSSI
|
|
CINR vs. RSSI with Averaging
|
|
WiMAX Spectrum Analysis - Marker and Delta Marker Set
|
|
WiMAX Spectrum Response - WiMAX Multipath Analysis
|
|
WiMAX Preamble Indices - Single Frequency Carrier
|
|
WiMAX Spectrum - Single Preamble Spectrum
|
|
WiMAX Multipath Analysis - Correlated Power vs. Time (Symbols)
|
|
DragNet Analyzer Mapping Coverage
|
|
|
- Does
the YellowFin do 802.11b/g or 802.11a studies?
-
- While the YellowFin does scan the spectrum that common 802.11 Wi-Fi devices operate on, it does not demodulate Wi-Fi packets. YellowFin was designed for WiMAX installations, troubleshooting and interference detection.
|
|
